Manufacturer : DeltaV
Product No. : VE3008
Product type : MQ Controller
Power requirement : Supplied by System Power Supply through 2-wide Power/ Controller Carrier
Fuse protection: 3.0A, non-replaceable fuses
Power dissipation: 5.0W typical, 7.0W maximum
Mounting : On right slot of power/controller carrier
User Memory : 48 MB
Operating temperature : -40° to 70° C (-40° to 158° F)
Storage temperature : -40° to 85° C (-40° to 185° F)
Relative humidity : 5 to 95%, non-condensing
Product type : MQ Controller
Primary Control Network : 8-pin RJ-45 connector
Redundant Control Network : 8-pin RJ-45 connector
Shipping weight: 1.5Kg

The MQ controller provides communication and control between field devices and other nodes on the control
The Internet. Creating control policies and system configurations on earlier DeltaV™ systems can be done with this powerful
The controller. MQ controllers offer all the features and MD Plus controllers have the same number of features
The memory of. The control language executed in the controller is described in the Configuration Software Suite product data table.

The MQ controller is just as fast as the MD Plus controller and offers the same configurable memory as the MD Plus
The controller. The Ethernet port is full-duplex, with a maximum throughput of 100MB/ s. The result is reduced CPU utilization and
Higher control strategy capability. Self-addressing. The DeltaV controller is unique in that it automatically recognizes the DeltaV control network.
When the controller is powered on, it automatically assigns a unique address – no dip switches, no configuration – just plug in
And play! Position yourself. The physical location of the controller is easy to find.
Leds on the surface of the controller can flash, providing a powerful visual cue.
Automatic I/O detection. The controller can identify the I/O interface channels on all subsystems.
When the I/O interface is plugged in, the controller knows the general characteristics of the field device that I/ manages
Interface. This reduces the configuration simplicity associated with worthless projects!
Connect to electronic wiring and wireless I/O.
Starting with DeltaV v14.3, CHARM and wireless devices are connected via a CHARM I/O card (CIOC) and wireless I/O
A card (WIOC) can be assigned to an MQ controller. This makes adding I/O to an existing controller easier than ever
Simply add CIOC and/or WIOC to the DeltaV zone to control the network.