VM600 IOC8T input/Output (interface) card – supports 8 channels for temperature or process monitoring

Model: VM600 IOC8T

The VM600 IOC8T input/output card is used for AMC8 cards

These cards will be phased out, with no replacement cards available until 2027.

VM600: not replaced.

VM600Mk2: Replaceable module for 2024-2025.

Input/output (interface) card for AMC8 card – supports 8 channels for temperature or process monitoring

Configurable signal input and current source output for each monitoring channel

The DC output can be configured as a current based signal (4 to 20 mA) or a voltage based signal (0 to 10 V) per monitoring channel, four configurable relays, each with three contacts, and alarm reset (AR) and hazard bypass (DB) control inputs with high quality, high reliability interface (I/O) cards for AMC8 analog monitoring cards. Mechanical monitoring system based on VM600 rack. The IOC8T card supports eight temperature or process monitoring channels, all of which are configured independently. The IOC8T interface card is installed in the rear of the VM600 ABE04x rack, directly behind the AMC8 card, forming a pair of cards.

peculiarity

Input/output (interface) card for AMC8 card – supports 8 channels for temperature or process monitoring

Configurable signal input and current source output for each monitoring channel

The DC output can be configured as a current-based signal (4 to 20 mA) or a voltage-based signal (0 to 10 V) per monitoring channel

Four configurable relays, each with three contacts, as well as alarm reset (AR) and hazard bypass (DB) control inputs