Model/Item number 1394C-SJT22-A Series
Product line servo controller
Module type system
Rated power 22 kW
Input phase 3
Series enhancements Terminating, filtering (EMI) and smart power
Factory installation options Analog input (10 VDC)
Input voltage 360-480AC voltage
Nominal bus output voltage 380/460 V 530/680 V DC
Continuous power output 380/460 volts 17/22 kW
Peak power output 136 kW
Efficiency 98%
Continuous current output 33.8 amps
Peak current output 200 amps
Line loss traverses 20 milliseconds
Rated AC input voltage 324-528 volts AC, 50-60 Hz, 3 phases
Ac input current 28.6 amps
Description
The 1394C-SJT22-A is an Allen-Bradley servo controller with analog module functionality and a ±10 volt DC analog interface. It is a C Series system module with features such as intelligent power supply, EMI filtering and improved terminating. The 1394C-SJT22-A system can support up to four axes and is used as a speed or torque controller. It comes with the Bulletin 1201 HMI module, which allows for automatic adjustment and quick startup. The 1394C-SJT22-A also features a SCANport interface **, continuous output current of 33.8 amps at DC voltage, continuous output power of 22 kW**, ** and a three-phase power supply. The 1394C-SJT22-A has power inputs such as 24 volt AC power supply, disconnect function, fuse box, and 24 volt DC power supply for motor brakes and hot contacts.
The 1394C-SJT22-A operates on a power supply of 324 to 528 volts AC (50 to 60 Hz) with an efficiency of 98%. The 1394C**-SJT22-A has a capacitance of 660 μF and an inductance of 500 μH, requiring an external shunt module. The 1394C-SJT22-A has diagnostic functions including current monitor, thermal overload detection and feedback signal monitor. In addition, it has status leds for the system and shaft modules. Also included are electrical noise protection and improved ground terminals.