The distance between the chlorine detector and the release source
Many industrial production, will produce a variety of toxic gases, a little attention will be poisoned, industrial common toxic gases include: Ammonia, ozone, nitrogen dioxide, sulfur dioxide, chlorine, carbon monoxide, carbon dioxide, hydrogen sulfide, etc., among which chlorine is a common toxic gas in the industry, chlorine plants, alkali plants and the use of chlorine to make pesticides, bleach, disinfectants, plastics, synthetic fibers and other factories discharged waste gas. The chlorine detector can monitor the concentration of chlorine in the air in time, and when there is a chlorine leak, the chlorine concentration exceeds the alarm will issue an alarm. What is the appropriate distance between the specific chlorine detector and the release source?
Chlorine gas detection alarm function
Chlorine gas is very harmful to the human body, once there is chlorine gas leakage, it will lead to poisoning of staff, inhalation of a large number of toxic gases and even death, and chlorine gas leakage will also lead to air pollution. The chlorine detector can help us to monitor the concentration of toxic gases in the air in real time and find out whether there is a leak in time.
Chlorine detection alarm is usually divided into two types, portable and fixed, of which portable chlorine detection alarm is mainly used for on-site staff safety inspection, can be carried, detected harmful gas concentration exceeded, will immediately alarm, fixed chlorine detection alarm is mainly installed in the work workshop, warehouse and other toxic and harmful gas places, It can check the chlorine concentration in the workshop 24 hours a day, and once it is detected, it can issue an alarm through the controller and start the linkage protection equipment.
When the chlorine gas detection alarm detects that the gas concentration reaches the alarm value set by the alarm, the alarm will issue an audible and optical alarm signal to remind people to evacuate, force exhaust, shut down equipment and other safety measures to prevent poisoning accidents, so as to ensure safe production.
The distance between the chlorine detector and the release source
In general, when the toxic gas is slightly lighter than the air, the detector is installed above the release source, and when the toxic gas is slightly heavier than the air, the detector is installed below the release source. The release source is in a closed or semi-closed building, and the distance between the chlorine detection probe and the release source should not be greater than 1m.
Chlorine gas detection alarms are widely used in the industrial field, and different types of gas alarms can be selected according to industrial needs. The chlorine gas detection alarm in the industry can find the chlorine gas leak in the first time, and take timely protective measures to prevent the poisoning accident of operators.
Ammonia detector is widely used in petroleum, chemical industry, metallurgy, electric power, coal mine, water plant and other environments to effectively prevent ammonia poisoning and explosion accidents.