The DS200FSAAG2ABA printed circuit board has 5 jumpers, 1 10-pin connector, and 2 fuses

The DS200FSAAG2ABA printed circuit board has 5 jumpers, 1 10-pin connector, and 2 fuses
​About DS200FSAAG2ABA
As mentioned earlier, this DS200FSAAG2ABA printed circuit board product was originally designed and manufactured for GE’s Mark V family of turbine control systems. The DS200FSAAG2ABA PCB was developed to exist in a specific Mark V Series functional role as a field supply gate amplifier board, although the original product for this specific Mark V Series function was the DS200FSAAG2A parent Field Supply Gate Amplifer board. Three important product revisions for this DS200FSAAG2ABA device are missing. As you might have guessed by analyzing its full extended series name, this larger Mark V series of DS200FSAAG2ABA printed circuit boards, or PCBS for short, has specific applications in the management and control systems of compatible and popular wind, steam and gas turbine automatic drive components. The larger Mark V series of this DS200FSAAG2ABA product must be considered a now obsolete GE legacy product line, as its production was discontinued due to obsoletion for many years after its first GE release. The Mark V series of DS200FSAAG2ABA PCBS, while a legacy product line, still has some nice updates as it was one of the last GE product lines to use Speedtronic control system technology, The technology was introduced in the late 1960s with the Mark I series.
Hardware tips and specifications
As with any Mark V Series product offered to us here for new and refurbished stock, the functionality of this DS200FSAAG2ABA PCB was introduced when its internal components received a specific series of function-enhanced hardware components. The GE field supply amplifier board DS200FSAAG2ABA features 5 jumpers, 1 10-pin connector, and 2 fuses. It also populates multiple test points. In addition to the 10-pin connector, the GE field supply amplifier board DS200FSAAG2ABA is equipped with four 2-pin connectors, so the board can be connected to multiple cables that must be disconnected and reconnected during the replacement process. For the sake of this personalized product page for DS200FSAAG2ABA products, which is bad enough, for your convenience, many of the above customisable hardware parts in different styles in their normal Mark V series components have been named in the manual TAB above attached to the DS200FSAAG2ABA original instruction manual. As with any individual hardware component that can be used to assemble this DS200FSAAG2ABA product, each of these pieces of hardware comes with its own factory-printed naming label. Some of the customizable hardware for DS200FSAAG2ABA printed circuit boards include:
Two 30 A, 60 V fast blown fuses

A total of 6 Berg manual mobile hardware jumpers marked JP1-JP6
Jumpers in this DS200FSAAG2ABA product assembly have been factory set to support the standard NRP default mode, although they can be selected for NRP mode. The DS200FSAAG2ABA PCB’s two main fuses are considered customizable as they can be easily installed or removed from the manual identification onboard fuses block from the DS200FSAAG2ABA printed circuit board. To avoid costly errors that can lead to increased driver downtime, and to make replacement quick and easy, write the identifier of the connector to which the cable is connected on the length of the tape. Then, attach the tape to the cable. Only then should you disconnect the cable from the board. When you are ready to reconnect the cable, use the identifier to find the connector and reconnect the cable. When disconnecting cables, follow some guidelines to prevent damage. Simply grab the cable at the connector end and remove it. If pulled from the cable section, it will put pressure on the cable and may damage the cable by pulling out the wire. This is especially true for ribbon cables because the multiple wires are very thin and the connection from the ribbon to the connector is not well supported. When you reconnect them, make sure that the cable is fully secured in the connector so that all signals can be passed to the board. If the connector has retaining clips to hold the board in place, make sure they are engaged.
FAQ about DS200FSAAG2ABA
What kind of battery does DS200FSAAG2ABA have?
The DS200FSAAG2ABA has a CSC 22-1200 VDC-660 VAC battery.
How big is DS200FSAAG2ABA?
DS200FSAAG2ABA is 11 inches wide. DS200FSAAG2ABA is 4 inches tall.
What kind of fuse does DS200FSAAG2ABA have?
The DS200FSAAG2ABA has two 30 amp Limitron quick fuse.