The DS215DMCBG1AZZ03A is a board assembly manufactured by GE for its MKV Speedtronic system
About DS215DMCBG1AZZ03A
The DS215DMCBG1AZZ03A is a board assembly manufactured by GE for its MKV Speedtronic system. MKV was designed to Control gas turbine and steam turbine systems, and while MKV board components are no longer manufactured by the original manufacturer as members of the now discontinued outdated legacy product family, they can be found on AX Control as refurbished and fully tested units. The DS215DMCBG1AZZ03A is the driver board. It offers updated hardware and/or firmware compared to the DS200 board of the same name. The DS215DMCBG1AZZ03A product is not an original developed PCB for its particular Mark V Series feature, as evidenced by the trailing “A” alphanumeric of its DS215DMCBG1AZZ03A feature product number. While the larger Mark V series of this DS215DMCBG1AZZ03A PCB is generally functionally obsolete, it is still lauded in the larger automation industrial market for being one of the last Mark product families to be developed, The patented Speedtronic control system technology first appeared in the original Mark I series introduced in the late 1960s.
Hardware tips and specifications
The DS215DMCBG1AZZ03A is a frequently filled circuit board with the following specifications:
Five vertical cable connectors. These include 4 male and 1 female connectors.
Three vertical connector connectors.
Two auxiliary boards. It includes a vertically mounted board and a horizontally mounted board. Both boards are located in the lower left corner.
Three prick connectors.
More than 20 jumper switches.
Reset switch located in its upper left quadrant.
LED indicator light.
The inductor coil.
TP test point for checking circuit board voltage.
Over 55 integrated circuits. These include oscillating chips, field programmable gate arrays, and EPROM chips for data storage.
Several fuse assemblies.
The DS215DMCBG1AZZ03A uses a resistor network array, transistors, and a variety of capacitors, diodes, and resistors. Use lettering and alignment marks and notches to mark the board to align along its two edges. It is drilled in the corners of the board, in the center of the board, and has additional holes along the edge of the board.
| GE | DS200TCTGG1AFF |
| GE | DS200TCQCG1BKG |
| GE | DS200TCQCG1BGF |
| GE | DS200TCQAG1BHF |
| GE | DS200TCPDG2B |
| GE | DS200TCEAG1BNE |
| GE | DS200TCEAG1ACB |
| GE | DS200TCCAG1BAA |
| GE | DS200TBQDG1AFF |
| GE | DS200TBQCG1AAA |
| GE | DS200TBOCG1AAA |
| GE | DS200SLCCG1AFG |
| GE | DS200SIOBH1ACA |
| GE | DS200SIOBH1ABA |
| GE | DS200SIOBH1AAA |
| GE | DS200SDCIG2AHB |
| GE | DS200SDCIG2AHB |
| GE | DS200SDCIG2AEB |
| GE | DS200SDCIG1ABA |
| GE | DS200SDCIG1ABA |