The GE Drive Control Board DS200SDCCG1AGD is one of the main controllers for the drives in the Mark V series

The GE Drive Control Board DS200SDCCG1AGD is one of the main controllers for the drives in the Mark V series
DS200SDCCG1AGD Technical specifications
Part number: DS200SDCCG1AGD
Series: Mark V
Manufacturer: General Electric
Description: GEI-100029
Product type: Drive control card
Functional acronym/abbreviation: SDCC Corporation
Group change: G1 series
For AC2000, DC2000, and EX2000 drive applications
About DS200SDCCG1AGD

The GE Drive Control Board DS200SDCCG1AGD is one of the main controllers for the drives in the Mark V series. The Mark V series is one of the most recently developed product lines that utilizes GE’s patented style Speedtronic technology in its assembly, although it is considered a legacy series by GE as it was eventually discontinued by the original manufacturer. The DS200SDCCG1AGD drive control board’s Mark V series has specific applications in the management and control systems of related gas, steam and wind turbines that support GE products. Although the DS200SDCCG1AGD printed circuit board can be defined as a drive control board, it is by no means the original product with a specific function in the Mark V turbine control system family; This would be the DS200SDCCG1 drive control board conspicuously missing three major revisions to this DS200SDCCG1AGD product.
Hardware tips and specifications
As with any product offered with the Mark V turbine control system family, the components of this DS200SDCCG1AGD PCB are filled with its own hardware component family and component specifications that describe its intended family functions. The GE drive control board DS200SDCCG1AGD is equipped with three microprocessors and RAM, and multiple microprocessors can access them simultaneously. The 10 leds on the GE Drive control board DS200SDCCG1AGD are used to display the fault code in the event of an error that triggers the fault. The ten leds are lined up and display the error code together. If no errors are encountered and the board is functioning properly, the leds will light up in order from left to right, two leds at a time. To view the LED on the DS200SDCCG1AGD, you can open the board door, locate the board, visually inspect the LED and understand the condition of the board. However, you must be careful when opening the cabinet door because of the high voltage present in the board and all components. Do not touch anything in the cabinet while the drive is powered on. Also, when the door is open, do not let anything fall into the cabinet, and close the door after the inspection is completed. Multiple auxiliary boards from the Mark V turbine control system family can be mounted on the surface of the DS200SDCCG1AGD PCB to improve efficiency or handling capabilities. Some of these optional subboards include:
DS215SLCC or 531X306LCC LAN communication card
531X309SPC signal processor card
DS200SPCB Multi-Bridge signal processor card
All of these products mentioned above are named by a combination of their alphanumeric product numbers and the features they play on the DS200SDCCG1AGD PCB and the rest of its Mark V series automatic driver assembly. When you start the DS200SDCCG1AGD board for the first time after installing the product, you must set configuration parameters to define how the board will handle information and control the drive. There are some software tools available for editing parameters and can be used on a laptop. If you want to configure multiple cells at the same time, you can create a configuration and then download the same configuration to multiple boards. For more information on the DS200SDCCG1AGD model, see the attached GEI-100029 Driver control Card manual above, which provides information on card sets, LED diagnostics, and more.