What kind of DS200NATOG2A board is?

FAQ about DS200NATOG2A
What kind of DS200NATOG2A board is?
​The DS200NATOG2A board is a Voltage feedback scale board (NATO).
There are five resistor strings on the DS200NATOG2A board. What is their purpose?
​The main use of resistor strings is with AC and DC inputs. Each string has three thorn connectors, resulting in a total of 15 input points. Each power also has two optional jumpers.
Is there a difference between the G1 and G2 North boards?
​Yes, we do! The G1 board contains six resistors per string, while G2 replaces the two bottom resistors with two jumpers and only four resistors per string.
How are DS200NATOG2A board outputs contained and connected?
​The output of the five lamp strings for AC and DC voltages are connected to a 20-pin strip joint with a metal oxide varistor to help prevent each lamp string from getting too high in case the output strip circuit is interrupted.
What is the alphanumeric directory number on DS200NATOG2A for?
​The numbers on the board are used to help identify the correct parts when they need to be replaced. Specific meanings can be found in the GEI-100225 Voltage Feedback Panelist User Guide that comes with the “Manuals” TAB above.

About DS200NATOG2A
The DS200NATOG2A NATO board is a voltage feedback scale board manufactured by General Electric. The model is part of a second set of variations. The purpose of this model is to attenuate the AC and DC voltages on the SCR bridge. When the DS200NATOG2A model performs these functions, it ensures that the bridge voltage feedback is accurately derived. As mentioned above, the DS200NATOG2A model is a G2 unit that will replace the two bottom resistors with two jumpers, giving the model four resistors per string.
​The output of the board is carried out via a string of five lights connected to a 20-pin strip joint. In addition, there are several MOV (metal oxide varistors) that prevent the output voltage from being too high if the strip circuit is interrupted when the input voltage is present. The load resistors required for work are located on the connected grid distribution status board, not on the NATO board.
​The voltage feedback induction board DS200NATOG2A attenuator voltage is set by spike connector and jumper for the G2 variant of NATO; There are multiple VLG and VLL inputs, one of which has a VLL input of 2200 and a VLG input of 1270.17, and the VLG output of these inputs is 1.905. For these specific inputs, there are several wire jumpers, two resistors, and an input spike connector JxA.
​The DS200NATOG2A model uses multiple agency approvals; These certifications are CSA, EC and UL standards for control and known transients.